Product Description

MSK061C-0600-NN-M1-AG1-NNNN is one of the several variations of MSK061C motors designed by Bosch Rexroth. They are a reputable company in the world of motors and accessories, so let’s take a look at what this particular unit brings us.

Like other models from the IndraDyn S series, the motor seems versatile. The unit has a maximum torque of 32 Nm while the continuous torque at a standstill is set at 8 Nm. The maximum current is 34.7A while the continuous at a standstill 60K is 7.7A.

Although it seems more powerful than some other models in the same series, MSK061C manages to maintain a relatively low noise level. It shouldn’t pass 75 dB[A] under normal operating conditions.

The motor utilizes an optical encoder with an absolute position recording within 4096 motor revolutions. The system accuracy is within 80 angular seconds, and the axis’ absolute position remains when the voltage is turned off.

The product doesn’t come with a holding brake as the manufacturer didn’t deem it as necessary for this unit. As for the motor cooling system, it uses the so-called natural convection cooling. It is nothing else than a way to cool itself gradually after usage. The heat will slowly dissipate, but keep in mind that the effectiveness of this motor cooling system depends on the tidiness of the motor.

This variant of the MSK061C uses a plain shaft with sealing ring. Since they are rubbing seals, you should know that they can produce and wear frictional heat. That is why you should make sure to clean the sealing point regularly and lubricate the seal. The good news is that the materials should be very resistant to chemicals and oils.