Product Description

Bosch Rexroth solves your industrial automation challenges through its products like servo motors, frequency converters, drive controllers, and a wide range of control sections. The company’s power tools are famous for their durability and affordability.

The MSK061C-0300-NN-S2-UG0-RNNN model of the synchronous servo motor represents the MSK series offered by Rexroth Indramat. The MSK061 synchronous servo motor is especially designed to be used in applications that require a maximum torque of 32 Nm with the highest velocity of 4,200 revolutions per minute. The servo motor generates heat during the continuous operation which should dissipated efficiently. During the peak load, the ambient air temperature should be in the recommended range. The permissible humidity value for the MSK061 synchronous servo motor can be 90% with no condensation. Although the device is IP65 protected, it should be used in a manner defined in the product manual that comes with the device. During the peak loads, the maximum current consumption of measured to be 19.4 A at a frequency of 50/60 Hz. The device is shipped after testing it for safe operation. The device complies to thermal class 155 specifications.

The model MSK061C-0300-NN-S2-UG0-RNNN comes without the holding brakes with a total mass of 8.3 kg. Owing to its lightweight design, it can be easily installed in the desired mounting potion with its flange. The flange has four standard holes used for secure mounting. The model (MSK061C-0300-NN-S2-UG0-RNNN) comes with single-turn optical encoder with high resolution operation. The encoder provides feedback for the output shaft position to the drive controller which generates the command signals to the motor. Use the type code to find more details in the MSK user guide.