Product Description

The Bosch MSK061B-0300-NN-M3-UG0-NNNN is a servo motor. It features a capacitive multiturn encoder. Specifications for the encoder include 4096 distinguishable revolutions, 16 signal periods, ±520 angular seconds system accuracy, 12000 RPM maximum encoder speed, 50 milliamps maximum current and 7 to 12 Volts DC supply voltage. The MSK061B-0300-NN-M3-UG0-NNNN does not include a holding brake. The housing of the motor has a standard design. The housing is completely enclosed. This in combination with a shaft seal on the smooth shaft leads to a IP65 rating for the motor. The motor is totally safe from dust ingress. The motor is also protected against water from low-pressure jets. The main shaft on the MSK061B-0300-NN-M3-UG0-NNNN is smooth and has a diameter of 19 millimeters. The length of the motor housing is 223 millimeters. The motor mounts through four holes on the motor flange.

Size of the flange on the MSK061B-0300-NN-M3-UG0-NNNN motor is 116 millimeters. The approximate motor mass is 5.7 kilograms. The motor is designed for applications such as metal forming machines, printing machines and robotics. A drive controller is used for motor control. The controller also provides electrical power to the motor. The power connector and feedback connector on the MSK061B-0300-NN-M3-UG0-NNNN can be rotated 240 degrees. The motor is designed for natural convection. The specified ambient temperature range is 0 to 40 degrees Celsius. Output of the motor derates when the motor is operated outside this temperature range. Detailed torque-speed curves are provided for the MSK061B-0300-NN-M3-UG0-NNNN in the product documentation. The continuous current and torque at standstill are 1.9 Amps and 3.5 Nm. The maximum current and torque are 8.6 Amps and 14 Nm. Maximum speed of the MSK061B-0300-NN-M3-UG0-NNNN is 4200 RPM.