Product Description

The Bosch MSK060C-0300-NN-M2-UP0-RNNN is a MSK series synchronous servo motor. As per the type code, the frame size is 60 and the frame length is C. The code for the winding on the motor is 0300. The MSK060C-0300-NN-M2-UP0-RNNN cools through natural convection. Other integrated motor features include optical multiturn encoder with EnDat 2.1 interface, rotatable power connectors and shaft with keyway and sealing ring. A holding brake is not available but can be ordered as an option. The MSK060C-0300-NN-M2-UP0-RNNN is designed with increased concentricity and run out. The motor encoder is rated for 2400 signal periods. Connectors on the MSK060C-0300-NN-M2-UP0-RNNN are 240-degree rotatable. The MSK060C-0300-NN-M2-UP0-RNNN is rated for 8 Nm continuous torque at standstill and 4.8 Amps continuous current at standstill. Maximum torque that the motor can deliver is 24 Nm.

The maximum current that the MSK060C-0300-NN-M2-UP0-RNNN can deliver is 19.2 Amps. The motor has four pole pairs. The thermal time constant is 15 minutes. The maximum speed of the motor is 4900 RPM. The sound pressure level produced by the operating motor is 75 dB. Bosch has designed the motor for 0 to 40 degrees Celsius ambient temperature. The housing of the MSK060C-0300-NN-M2-UP0-RNNN is IP65 rated. This means that the servo motor can be used in areas that contain dust as the motor housing is completely dust proof. The motor housing also provides a very good level of protection from liquids. MSK motors are used with drive controllers for applications such as robotics, metal-forming machines and printing machines. They are designed for professional installation and maintenance. Relevant safety instructions included in the product documentation should be following at all times. Shipping weight of the motor is 8.4 kilograms.