Product Description

The Bosch Rexroth MSK050C-0600-NN-S1-UG0-NSNN is a MSK servo motor. It features standard and Ex design according to EN 60079. Before delivery, the motor is inspected to ensure that it operates safely. The motor should only be used as intended. The motor should be inspected at the time of delivery. Damaged products should not be put into operation. Unintended motor use can result in injuries and equipment damage. The manufacturer cannot be held liable for injuries/damage that occur due to improper equipment use of its products. MSK motors can be used as rotary motors and servo drive motors for applications such as metal-forming machines, robotics, printing machines and machine tools. Only accessories specified in the documentation should be used with MSK motors. Drive controllers that are used for motor control should be programmed prior to system commissioning.

As per the product code, the frame size of the MSK050C-0600-NN-S1-UG0-NSNN motor is 050. The motor frame length is C. The motor includes a built-in single-turn encoder with Hiperface interface and 128 signal periods. The shaft on the MSK050C-0600-NN-S1-UG0-NSNN is a standard smooth shaft with seal. Along with a completely enclosed housing, the shaft seal contributes to the IP65 protection rating of motor. The motor can be installed outside cabinets and near operating machinery. The MSK050C-0600-NN-S1-UG0-NSNN does not feature a holding brake. Both the power and feedback connector are rotatable. The cooling method used for cooling by the MSK050C-0600-NN-S1-UG0-NSNN is natural convection. This requires proper ventilation which can only be ensured if sufficient clearance is provided on all sides of the installed motor. The permissible ambient temperature range is 0 to 40 degrees Celsius. Weight of the motor is 5.4 kilograms.