Product Description

The MSK050C-0600-NN-M3-UG1-NNNN is a Bosch Rexroth servo motor. The motor is capable of sharing speed and position information with drive controllers. This is made possible by an integrated encoder that can measure motor parameters such as speed. The encoder on the MSK050C-0600-NN-M3-UG1-NNNN motor is a capacitive encoder rated for 16 signal periods. The encoder can provide information within 4096 turns of the motor shaft. The encoder requires 7 to 12 Volts DC input and draws maximum 50 milliamps current. The maximum encoder speed is 12,000 RPM and the encoder accuracy is ±520 angular seconds. The MSK050C-0600-NN-M3-UG1-NNNN motor also includes an integrated electrically-releasing holding brake. The holding torque of the brake is 6 Hm. The rated voltage and current for the brake are 24 Volts DC and 0.65 Amps.

The maximum connection time for the holding brake is 20 milliseconds. The maximum disconnection time for the motor holding brake is 60 milliseconds. The shaft on the motor is smooth and has a sealing ring. This seal undergoes wear during motor operation. Therefore it should be inspected periodically and replaced when required. The power connector and feedback connector on the MSK050C-0600-NN-M3-UG1-NNNN are 240-degree rotatable. The diameter of the motor shaft is 9 millimeters and the diameter of the MSK050C-0600-NN-M3-UG1-NNNN motor is 95 millimeters. The length of the motor shaft that is outside the motor is 40 millimeters. The length of the motor is 203 millimeters. The maximum electric speed of the MSK050C-0600-NN-M3-UG1-NNNN motor is 6000 RPM. During operation, the ambient temperature should be maintained between 0 and 40 degrees Celsius. The motor housing belongs to the IP65 protection category. The approximate weight of the motor is 5.4 kilograms.