Product Description

The MSK050C-0300-NN-M1-UP1-NSNN synchronous servo motor offered by Bosch Rexroth must be transported using cranes with loop lifting straps. The motor should be worked on only after shielding or covering adjacent live parts and protecting the system in which it is installed against restart. The product must be mounted after checking if its flange is free of burrs. The electrical connection of the device should be carried out after proper mechanical assembly. The connectors of the unit are intended to be connected and disconnected when they are de-energized and dry. The terminal box of the product must be opened only for connection and closed as soon as the connection is complete.

This motor has a circular power connector that should be placed on the thread of the terminal box. The product portrays a winding code of 0300. The device incorporates a sound pressure level of less than 75dBA and a thermal time constant of 14 minutes. The unit is not to be installed or operated in a malfunctioning or damaged state. It is not suitable for direct mains operation on a single-phase network or a three-phase network. The motor might require additional actuators and sensors to monitor and control it. The product can cause the connected drive controller to move dangerously due to faults in the motor control. This MSK050C-0300-NN-M1-UP1-NSNN motor can be transported to your address in any country.

The product depicts a flushing connection on the housing with a blind plug. The holding brake of this device works on the electrically releasing principle. The motor has to always be assembled, mounted, installed and operated only under the specified environmental conditions. It is not recommended to use the product underwater. This device can be flushed through its screwed connections. This synchronous servomotor is associated with a warranty tag that is valid for one year.