Product Description

The MSK040B-0450-NN-M1-UP0-NSNN synchronous servomotor from Bosch Rexroth is designed in accordance with ATEX 94/9/EC directives. The motor is intended for use in potentially explosive areas. This product is designed for use in general automation technologies. The device must be operated only with the manufacturer’s IndraDrive controls. The unit is one of the several MSK product groups of motors. The synchronous motor has 1.7Nm continuous torque at 60K in standstill mode. The product has to be used in its original state without any constructional modifications. The drive used with the device should be programmed before it is started for the motor to perform the application specific function.

This motor must be used only with accessories that are approved by the manufacturer. The product must not be used if the ambient conditions at the installation site demand a higher level of protection than what is specified on the motor type plate. The associated drive should be worked on only by qualified personnel. This drive may depict dangerous movements if there is a fault in the connected motor. The unit features an inlet as well as an outlet for flushing purpose. It also has an additional grounding connection. This MSK040B-0450-NN-M1-UP0-NSNN motor is backed by a one-year warranty and can be dispatched globally.

The product must always be serviced and repaired by the authorized or certified service team. This device can operate at a maximum temperature of 55°C with derated data. The unit has a very hot surface during operation. Its connectors have to be connected and disconnected only in the de-energized state. The motor does not have any holding brake. This product is UL Listed and CSA Certified. The device has four pole pairs. The unit makes use of a Hiperface multiturn absolute encoder. This motor is associated with a B5 frame size as per EN60034-7 specifications.