COVID-19 Update: Wake Industrial is open and available to support your automation needs.

MS2N07-D0BHN-CMUG0-NNANN-NN

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
  • MPN: R911374803
The MS2N07-D0BHN-CMUG0-NNANN-NN Servo Motor is manufactured by Rexroth, Indramat, Bosch. This motor has a winding of 2,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, with Seal shaft, and a M23 Angle Plug electrical connection.

MS2N07-D0BHN-CMUG0-NNANN-NN

  • {{ 'Rated ' + avg.toFixed(1) + ' (' + ratingCount + ' total ratings)' }}
  • {{ message }}
  • MPN: R911374803
The MS2N07-D0BHN-CMUG0-NNANN-NN Servo Motor is manufactured by Rexroth, Indramat, Bosch. This motor has a winding of 2,000 min with a Multiturn encoder design. This motor is Not Equipped with a holding brake, it has a Smooth, with Seal shaft, and a M23 Angle Plug electrical connection.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Exchange
Call to find out about our exchange credit for your defective unit.
Sell Us Your Surplus
Have a MS2N07-D0BHN-CMUG0-NNANN-NN to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The MS2N07-D0BHN-CMUG0-NNANN-NN is an IndraDyn S synchronous servomotor. This motor features a frame size of 70mm and a frame length of D. The product from Bosch Rexroth has a maximum electrical speed of 4,000min-1 and a maximum mechanical speed of 6,000min-1. It has an IM B5 design according to EN600034-7 specifications. The device should not be commissioned without conformation to the specified machine and EMC directives. The flange has a size of 140mm. The servomotor uses a temperature sensor as one of the two systems to monitor the motor temperature. The motor warning temperature has a threshold value of 140°C. The device is available with a one-year warranty period.

The synchronous motor houses a rotor with low inertia. The product has a cooling mode of forced ventilation using an axial fan. The fan operates at a frequency of 60Hz and a voltage rating of 115V. There must be no condensation on the motor during operation, storage or transport. This device must be transported in an ambient temperature range of -25°C and +55°C. The performance data of the unit has to be lessened if the given limits are exceeded. If the motor is stored for more than one year without usage, it must run without load at a speed of 800to 1,000RPM before it is put to use.

The standard design motor does not incorporate any holding brake. The product has a smooth shaft that is fitted with a shaft sealing ring. The capacitor has a discharge capacity of 4.1nF. The winding features a thermal time constant of 54s. The device has a weight of 17.5g. The encoder has a multi-turn design with 4,096 absolute revolutions. The device is fitted with standard bearings. The rotor has a moment of inertia of 0.0021g*m2 +/-10%. The servo motor can be delivered to the address of your choice through our team of trustworthy transport partners.

  • MS2N07D0BHNCMUG0NNANNNN
  • MS2N07 D0BHN CMUG0 NNANN NN
  • ms2n07-d0bhn-cmug0-nnann-nn

MS2N07-D0BHN-CMUG0-NNANN-NN Technical Specifications

Electrical Connection: M23 Angle Plug
Encoder Design: Multiturn
Holding Brake: Not Equipped
Shaft: Smooth, with Seal
Winding: 2,000 min