Product Description:

The MOT-FC-NT3-FCB-364T-4-6CL-60-C3L-WEG is an AC induction motor manufactured by Bosch Rexroth Indramat for the MOT Low Voltage Induction Motors series. It is intended for continuous-duty drive tasks in industrial automation where reliable shaft power is required to run pumps, fans, or gear-coupled conveyors. By converting three-phase electrical energy into mechanical rotation, the unit supplies constant torque that downstream machinery can use for synchronized material handling or fluid movement.

The motor satisfies the NEMA Premium efficiency class, so electrical losses are minimized during full-load operation. An IC411 (TEFC) enclosure channels internal airflow with an integral fan while keeping dust and moisture away from the windings. Rated output is 60 hp, delivered when the stator receives a line supply of 230/460 V at 60 Hz. External junctions are sealed to the IP55 protection level, guarding against water jets and incidental contact. The machine runs on three phases and employs a four-pole magnetic layout, which sets a synchronous field speed that pairs with typical constant-speed processes. A gray cast-iron housing resists vibration and helps maintain alignment between the rotor and stator cores, while the left-side terminal box simplifies cable entry in installations that place the drive against a right-hand wall.

The four-pole design corresponds to a synchronous speed of 1800 rpm on a 60 Hz supply. The 364/5TC frame provides adequate mass for heat dissipation and includes a machined face for direct gearbox or pump coupling. Mounting holes follow the C-Face Foot Mount pattern, so alignment remains fixed during service. A built-in PTC sensor embedded in the windings signals the drive if temperature thresholds are reached, allowing controlled derating instead of an unexpected shutdown.