Product Description:

The MOT-FC-EV2- V1- 90L-4-5CA- 1,5-A3T-HOY is a three-phase induction motor supplied by Bosch Rexroth Indramat within the MOT Low Voltage Induction Motors series. Designed for integration into material-handling lines and general machinery, the unit converts electrical energy into rotating mechanical power for pumps, fans, or conveyors. Its frame and winding layout comply with IEC standards, allowing direct mounting to compatible gearboxes or belt drives in industrial automation cells. This arrangement supports common machine configurations without requiring a specialized mounting interface.

At its nominal operating point, the motor delivers a mechanical output of 1.50 kW while operating at a rated line-to-line voltage of 400 V. Under this condition, the shaft turns at 1440 rpm, a speed that results from two pole pairs operating on a standard 50 Hz supply. Continuous torque is 9.95 Nm, produced with a rated current of 3.5 A through a Y-connected stator winding. The electrical design achieves a power factor of 0.77, limiting reactive demand on the mains. Its efficiency is 0.839, so most of the input power is converted into useful mechanical work. A 6205-ZZ/C3 bearing supports the rotor during continuous operation and helps maintain stable shaft alignment under load.

For short, high-load events, the motor can reach a peak torque of 23.0 Nm before thermal limits intervene. The associated inrush is restricted by a maximum line current of 8.5 A. Acceleration is influenced by a rotor inertia of 0.0031 kg·m², allowing the motor to increase speed without excessive overshoot in positioning tasks. The housing generates a sound pressure level of 60 dB(A), which helps limit acoustic disturbance in occupied industrial areas. The star-connected winding keeps phase voltage within the insulation limits during steady-state and overload operation. These operating characteristics support controlled acceleration while preserving stable performance during temporary increases in mechanical demand.