MOT-FC-EV2- V1-132S-4-5CB- 5,5-A3T-HOY Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat MOT-FC-EV2- V1-132S-4-5CB- 5,5-A3T-HOY is part of the MOT Low Voltage Induction Motors series and has a rated power of 5.50 kW with a rated voltage of 400 V. This motor features a cooling method of IC416 and IP55 protection, with a rated speed of 1440 min⁻¹ and a rated torque of 36.5 Nm. It has a delta winding, a mass of 51.0 kg, and operates at a rated current of 11.0 A with an efficiency of 0.88 at full load.
Internal Product Review
The MOT-FC-EV2- V1-132S-4-5CB- 5,5-A3T-HOY is a Bosch Rexroth low voltage induction motor rated at 5.50 kW and 400 V. IC416 cooling and IP55 protection support dependable operation in demanding industrial service. Rated torque of 36.5 Nm gives the motor strong drive capability and makes the unit a very solid selection for continuous duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MOT-FC-EV2-V1-132S-4-5CB-5,5-A3T-HOY is a three-phase induction motor produced by Bosch Rexroth Indramat for the MOT Low Voltage Induction Motors series. Its squirrel-cage design converts electrical energy into mechanical shaft power for automated equipment such as conveyors, pumps, and gear-driven stations used throughout manufacturing cells. The rotor has an inertia of 0.033 kg·m², which affects acceleration and deceleration when the connected equipment changes speed. This operating characteristic should be considered when configuring motion profiles for machinery that starts, stops, or reverses frequently.
Under nominal conditions, the motor delivers 5.50 kW of mechanical output while connected to a line voltage of 400 V at a supply frequency of 50.0 Hz. The shaft rotates at 1440 rpm and produces a continuous torque of 36.5 Nm. At this operating point, the stator draws a rated current of 11.0 A when its windings are configured in a delta connection. The power factor is 0.80, indicating the phase relationship between voltage and current at the motor terminals. The magnetic and thermal design supports a maximum speed of 4000 rpm and a peak torque of 83.0 Nm. Momentary inrush current can reach 27.5 A during startup, so the connected power equipment must accommodate this short-duration demand.
Overall efficiency reaches 0.88 at full load, reducing electrical losses and limiting heat generation during continuous operation. The enclosure has an IP55 ingress protection rating, which protects internal components against dust and low-pressure water jets. The IC416 cooling arrangement uses an attached fan to force air over the housing fins and maintain thermal balance during cyclic duty. With a total mass of 51.0 kg, the motor requires mounting hardware and supporting surfaces suitable for its weight. Standard IEC feet or flanges can be used to secure the housing and maintain alignment with the connected load.
