MOT-FC-EV2- V1-100L-4-5CA- 3-A3T-HOY Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat MOT-FC-EV2- V1-100L-4-5CA- 3-A3T-HOY is part of the MOT Low Voltage Induction Motors series and delivers a rated power of 3.0 kW and a rated speed of 1440 min-1. It operates at a rated voltage of 400 V with a rated current of 6.1 A and features a maximum torque of 46.0 Nm. The motor uses a Y winding connection and has a sound pressure level of 63 dB(A).
Internal Product Review
The MOT-FC-EV2- V1-100L-4-5CA- 3-A3T-HOY is a well-balanced low voltage induction motor rated at 3.0 kW and 400 V. Rated output at 1440 min-1 and 19.9 Nm supports steady machine drive performance with strong load handling. An efficiency of 0.856 and sound pressure of 63 dB(A) make the unit an appealing choice for efficient, controlled operation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat produces the MOT-FC-EV2-V1-100L-4-5CA-3-A3T-HOY as part of its MOT Low Voltage Induction Motors series. This three-phase squirrel-cage unit is intended to drive pumps, gearboxes, or conveyors where constant-speed operation is managed by contactors or variable-frequency drives. Within automated lines, it converts electrical energy from the low-voltage mains into mechanical shaft rotation suitable for medium-duty industrial motion tasks.
Under nominal conditions, the motor delivers 3.0 kW of mechanical output while drawing 6.1 A on a 50 Hz supply. The relationship between the two pole pairs and the line frequency gives the motor a rated speed of 1440 rpm, and at that speed the shaft produces 19.9 Nm of steady torque. The Y-connected stator windings and a power factor of 0.77 influence the current phase angle seen by upstream switchgear. A rotor inertia of 0.0087 kg·m² moderates acceleration and deceleration transients, allowing predictable speed regulation when the motor interfaces with closed-loop inverters. The terminal box orientation supports straightforward cable routing on horizontal machine beds. Electrical insulation and creepage distances support operation at 400 V line-to-line.
During short overloads, the electromagnetic system can supply 46.0 Nm before stalling, and in such events the line current may rise to 15.2 A. These overload ratings suit intermittent duty cycles common in indexing tables and packaging spindles. At full load, the electrical-to-mechanical conversion attains an efficiency of 0.856, which helps limit heat rise and support winding life. Audible output is measured at 63 dB(A) one meter from the housing. Power entry is protected by an M20 × 1.5 cable gland, and the frame’s surface ventilation helps dissipate heat. The motor uses a squirrel-cage rotor, so no external excitation hardware is required.
