MOT-FC-EV2-B35-180L-4-5CB- 22-C3T-HOY Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat MOT-FC-EV2-B35-180L-4-5CB-22-C3T-HOY is part of the MOT Low Voltage Induction Motors series and has a rated power of 22 kW with a rated speed of 1470 min-1. This motor features a rated voltage of 400 V, maximum current of 102.5 A, and mass of 215 kg. It delivers a maximum torque of 329 Nm and includes cable glands sized M40 x 1.5.
Internal Product Review
The MOT-FC-EV2-B35-180L-4-5CB- 22-C3T-HOY is a Bosch Rexroth low-voltage induction motor rated at 22 kW and 400 V. Rated torque of 143 Nm and rated speed of 1470 min-1 support stable, dependable performance in demanding drive applications. Delta winding and a 0.86 power factor make the unit a strong choice for efficient industrial motor service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MOT-FC-EV2-B35-180L-4-5CB-22-C3T-HOY is a low-voltage, squirrel-cage induction motor produced by Bosch Rexroth Indramat within the MOT Low Voltage Induction Motors series. It is intended for conveyor lines, pumps, and general machine drives. The unit transforms three-phase electrical power into continuous rotary motion for industrial automation tasks that demand stable speed and moderate starting current.
The motor delivers a rated mechanical output of 22 kW when a line-to-line potential of 400 V is applied at 50 Hz. Under these conditions, it draws a steady 41 A and reaches a synchronous speed of 1500 rpm, producing a shaft speed of 1470 rpm after slip. At that operating point, the shaft develops 143 Nm of usable torque. The electrical displacement factor of 0.86 indicates the phase relationship between voltage and current, a value that influences drive-side power factor correction. Two pole pairs establish the four-pole magnetic field, while the windings are arranged in a delta connection to match low-voltage distribution networks. The rotor has a moment of inertia of 0.173 kg·m², which affects acceleration time during load changes.
For short-term transients, the stator can draw a peak current of 102.5 A, enabling a momentary pullout torque of 329 Nm during starts or sudden load spikes. No-load operation is limited by a maximum mechanical speed of 3800 rpm, based on bearing and balance limits. The cast-iron frame weighs 215 kg and includes two M40 × 1.5 cable glands for power entry and grounding continuity. Airborne acoustic emission is 66 dB(A), supporting installation in plant areas with standard hearing protection requirements. The stator laminations are pressure-impregnated to control vibration. The motor uses B35 foot-and-flange mounting, allowing attachment to a machine base or direct alignment with compatible driven equipment.
