MOT-FC-ET2- V1-315M-4-5CB- 132-C3T-HOY Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MOT-FC-ET2- V1-315M-4-5CB- 132-C3T-HOY is part of the MOT Low Voltage Induction Motors series and has a rated power of 132 kW with a rated speed of 1480 rpm. The motor runs at a rated voltage of 400 V and supports a maximum current of 575 A. It weighs 930 kg and uses a delta winding connection with 2 pole pairs.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MOT-FC-ET2-V1-315M-4-5CB-132-C3T-HOY is a three-phase induction machine built by Bosch Rexroth Indramat and assigned to the MOT Low Voltage Induction Motors series. In automated plants, it converts electrical energy into shaft torque for pumps, conveyors, and fan drives within its power range. Its frame and variant code match mechanical footprints commonly used in low-voltage motor centers. This motor type is intended for fixed-speed industrial duty where reliable line operation and durable mounting are more important than servo-style position control. It is suited to applications that need continuous rotary output rather than rapid reversing or precise indexing.
The stator windings are connected in delta for a line supply of 400 V on a standard 50 Hz grid. With two pole pairs, the motor reaches a rated speed of 1480 rpm under load, which is close to synchronous speed for this frequency. The motor delivers 132 kW of output power for industrial loads such as compressors and extruders. Its continuous line current is 230 A, and the operating power factor is 0.88. M16 bolts on the terminal board secure ring lugs, and the cable entry uses two M63 × 1.5 glands to protect the enclosure opening and keep the connection area orderly. The electrical layout is suited to heavy plant supplies where the motor is started and run directly from the mains through standard protection gear.
A permissible inrush current of 575 A supports direct-on-line starting without requiring reduced-voltage starting hardware in every application. The rotor has a moment of inertia of 3.26 kg·m², which helps smooth speed changes when the driven load varies. The motor has a total mass of 930 kg, so it requires rigid mounting support and appropriate lifting equipment during handling. A 6319/C3 drive-end bearing supports radial loads from belts or couplings. Free-field noise is rated at 76 dB(A), which keeps the acoustic output within a typical range for a motor of this size. Its overall size and weight make it more appropriate for permanent installation on substantial machine bases than for portable or frequently moved equipment.
Frequently Asked Questions about MOT-FC-ET2- V1-315M-4-5CB- 132-C3T-HOY:
Q: What is the rated power of the MOT-FC-ET2- V1-315M-4-5CB- 132-C3T-HOY motor?
A: The MOT-FC-ET2- V1-315M-4-5CB- 132-C3T-HOY low voltage induction motor has a rated power output of 132 kW.
Q: What is the rated voltage for the MOT-FC-ET2- V1-315M-4-5CB- 132-C3T-HOY induction motor?
A: This motor operates at a rated voltage of 400 volts.
Q: What is the rated speed of the MOT-FC-ET2- V1-315M-4-5CB- 132-C3T-HOY?
A: The rated speed for this induction motor is 1480 rpm.
Q: What is the power factor of this Bosch Rexroth Indramat induction motor?
A: The power factor of the MOT-FC-ET2- V1-315M-4-5CB- 132-C3T-HOY is 0.88.
Q: What type of drive-end bearing is featured on the MOT-FC-ET2- V1-315M-4-5CB- 132-C3T-HOY motor?
A: A 6319/C3 bearing is used at the drive end of this motor.
