MOT-FC-ET2- V1-132M-4-5CB- 7,5-A3T-HOY Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911340644
The Bosch Rexroth Indramat MOT-FC-ET2- V1-132M-4-5CB- 7,5-A3T-HOY is part of the MOT Low Voltage Induction Motors series and has a rated power of 7.50 kW with a rated voltage of 400 V. This motor weighs 62 kilograms, uses an IC411 cooling method, and delivers a maximum torque of 113.0 Nm. It operates at a rated speed of 1460 revolutions per minute and has an efficiency of 0.89 at full load.
Internal Product Review
The MOT-FC-ET2- V1-132M-4-5CB- 7,5-A3T-HOY is a low voltage induction motor rated for 7.50 kW at 1460 min-1. IC411 cooling and 0.89 full-load efficiency support dependable thermal behavior and efficient operation in steady industrial service. Rated torque of 49.1 Nm makes this motor a strong choice for consistent drive performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MOT-FC-ET2-V1-132M-4-5CB-7,5-A3T-HOY is a three-phase, low-voltage induction motor manufactured by Bosch Rexroth Indramat within the MOT Low Voltage Induction Motors series. It supplies mechanical power to pumps, fans, conveyors, and other equipment used in automated processes. The motor converts electrical energy into rotational motion and can be connected through a conventional contactor starter or a compatible inverter. Its IEC frame and standard industrial power characteristics support integration into fixed-speed and variable-speed drive systems. The induction design provides a durable drive solution for applications that require continuous operation under stable load conditions.
At its nominal operating point, the motor produces 7.50 kW while running at 1460 rpm, which is consistent with the IEC 132 frame size referenced in its model code. The stator windings use a delta connection for a supply of 400 V, and the steady-state line current is 15.0 A. This electrical input produces a rated shaft torque of 49.1 Nm. The power factor is 0.82, which helps moderate reactive current in the connected power distribution system. The self-ventilated frame has an IC411 cooling classification, so a shaft-mounted axial fan directs air over the housing whenever the rotor turns. Rated operation uses a 50 Hz source, while a permissible surge current of 37.5 A supports short-duration overload conditions.
The motor can generate a starting torque of up to 113.0 Nm to accelerate loads with substantial initial inertia. Its rotor inertia is 0.041 kg·m², helping the drive respond predictably during acceleration and deceleration. The unit has a shipping mass of 62.0 kg, so appropriate lifting equipment should be used during transport and installation. Running noise is measured at 66 dB(A), which is suitable for many factory environments when normal workplace noise controls are observed. Full-load efficiency reaches 0.89, limiting energy losses and reducing the amount of waste heat produced during continuous operation. The balanced delta winding arrangement also supports symmetrical phase currents when the motor is supplied by a properly configured three-phase source.
