MOT-FC-ET2- V1-112M-4-5CB- 4-A3T-HOY Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MOT-FC-ET2- V1-112M-4-5CB- 4-A3T-HOY is part of the MOT Low Voltage Induction Motors series and has a rated power of 4.00 kW with a rated voltage of 400 V. The motor offers a rated speed of 1420 min-1 and a rated torque of 26.9 Nm, with an efficiency of 0.87 at full load. It weighs 37.0 kg and uses an IC411 cooling method.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MOT-FC-ET2-V1-112M-4-5CB-4-A3T-HOY is a low-voltage squirrel-cage induction motor built by Bosch Rexroth Indramat for the MOT Low Voltage Induction Motors series. It is intended to drive pumps, conveyors, or gear stages in automated machinery where constant-speed operation from three-phase mains is required. When connected directly to a frequency inverter or line starter, the unit converts electrical power into continuous mechanical rotation that keeps material flow synchronized with upstream and downstream processes. Its induction design supports general-purpose industrial applications that require reliable operation under sustained mechanical loads.
Nominal operation is established at an input of 400 V and a supply frequency of 50.0 Hz; these electrical conditions establish the stator flux and synchronous speed. Under these conditions, the machine delivers 4.00 kW of shaft power while turning at 1420 rpm. The rotor produces a continuous torque of 26.9 Nm, and 7.9 A of line current is required to maintain that load with a standard delta connection in the terminal box. The cooling arrangement follows the IC411 scheme, in which an integral frame-mounted fan moves air across the housing so the motor can sustain its rated output without an external blower. Rotor inertia is 0.019 kg·m², which moderates acceleration transients and simplifies drive tuning when the motor is paired with a speed-controlled inverter.
The stator winding can accept up to 19.7 A during short-term overloads, and the motor can develop a peak torque of 60.0 Nm during brief load transients. Overall energy conversion reaches an efficiency of 0.87, aided by a power factor of 0.84 that keeps reactive demand moderate on the supply network. The assembled motor weighs 37.0 kg, permitting rigid mounting on a suitable machine base without extensive structural reinforcement. Two pole pairs provide a balanced combination of speed and torque for general-purpose automation. The accessible terminal box houses the winding connections and protects them during normal industrial operation.
