Product Description:

The Bosch Rexroth Indramat MLS200S-3V-0150-NNNN is a secondary section for the MLS Synchronous Linear Motors series, built for direct linear force generation in automated material-handling and precision positioning axes. As part of a moving-coil linear motor system, the segment interacts with a primary track to convert electromagnetic energy directly into thrust, eliminating rotary-to-linear conversions and reducing mechanical play in high-speed assembly lines. This design minimizes maintenance and supports decentralized servo drives where gantry masses must be kept low.

The unit uses a base plate made of Steel, supplying mechanical stiffness and thermal conduction along the carriage. Above the plate sits a chromated C45 carrier that resists corrosion while providing threaded interfaces for sensor brackets. Fastening points are arranged along the outer edge, allowing clearance through the motor center for cables or cooling lines. A V4A stainless steel cover plate forms the external surface, so wash-down fluids in food or pharmaceutical lines do not damage the motor body. The magnet chain is shielded by an integrated rustless cover plate, protecting magnetic material from chips or coolant. Linear thrust derives from an array of permanent magnets, which provide stable flux density over the service temperature range and support repeatable positioning.

Mechanical attachment uses screw mounting, so installation only requires standard socket-head fasteners against the machine frame. The motor is classified with size code 200, meaning the active width accommodates large secondary loads without adding extra track modules. With a segment length of 0150, multiple identical sections can be combined to match stroke requirements. The model uses Secondary Motor Type S, confirming compatibility with MLS primaries that employ moving-stator architectures and support modular expansion of multi-carrier transport lines.