MLS200S-3P-0600-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The MLS200S-3P-0600-NNNN is a synchronous linear motor from the MLS Synchronous Linear Motors series by Bosch Rexroth Indramat. With a motor size of 200 and segment length of 600 mm, it features a base carrier made of C45 chromatic material and an integrated rustless stainless steel cover plate. The motor has an IP65 protection rating and a secondary mass per meter of 26.9 kg.
Internal Product Review
The MLS200S-3P-0600-NNNN is a Bosch Rexroth Indramat MLS synchronous linear motor featuring IP65 protection and a screw-fixed mechanical design. A stainless steel V4A cover plate combined with a 70 °C maximum secondary temperature supports dependable performance in demanding linear motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MLS200S-3P-0600-NNNN secondary segment belongs to the MLS Synchronous Linear Motors series manufactured by Bosch Rexroth Indramat. It forms the fixed magnetic track that works with a moving primary carriage to produce direct linear thrust, eliminating the need for rotary-to-linear gearboxes. When integrated into gantries, material-handling shuttles, or machining centers, the rail supports precise travel over a stroke determined by the installed track length. Additional secondary segments can extend the available travel for scalable industrial automation axes.
The rail is secured with screws to a chromated C45 base carrier. Its mounting holes use M6 threads, and each screw requires a tightening torque of 10 Nm to secure the assembly to the machine bed. A regular hole pattern with a pitch of 75 mm and an end-hole offset of 37.5 mm simplifies alignment between adjacent segments. The pole width matches the end-hole offset to maintain magnetic continuity along the track. The rail has an overall width of 235 mm, which accommodates the size 200 geometry and the type S secondary magnet arrangement. During operation, the secondary iron must remain below 70 °C to preserve its magnetic properties and maintain the dimensional stability of the protective cover plate.
The cover plate is made from V4A stainless steel, providing mechanical protection against chips and coolant without requiring external bellows. Its IP65 enclosure rating provides protection against dust ingress and low-pressure water jets, allowing installation inside open machining enclosures. The secondary portion has a mass of 26.9 kg/m, which must be considered when sizing the machine bed and supports for an extended track. Each unit has a standard 600 mm segment length and connects with identical sections to create longer travel paths. The mounting fasteners have a property class of 8.8, providing suitable strength for securing the rail during operation. Consistent spacing between adjoining sections helps the moving primary carriage pass smoothly across segment boundaries.
