Product Description:

The MLS100S-3A-0600-NNNN is a secondary segment manufactured by Bosch Rexroth Indramat for the MLS Synchronous Linear Motors series. It serves as the stationary magnet carrier in a linear motor track, allowing the moving primary element to generate thrust without gears or belts. By forming a straight, rigid path, the segment enables high-precision positioning for pick-and-place modules, gantry loaders, and other automated handling stations. Because thrust is generated electromagnetically along the track, motion systems can avoid the backlash and mechanical wear associated with screw or belt drives.

This model has a physical width of 600 mm and a depth of 135 mm, and these dimensions support tight installation inside machine frames. A segment length index of 0600 identifies the active magnetic section, and multiple segments can be arranged in sequence when longer travel is required. The internal magnet pattern is matched to motor size 100, which supports proper flux linkage with compatible primary carriages as they move along the track. As a Type S secondary motor, the segment is optimized for standard force density rather than ultra-high-thrust variants. Despite the large magnetic surface, the secondary part mass is limited to 8.0 kg, so mounting loads on supporting structures remain moderate and help preserve guide alignment.

Environmental protection is provided by an ingress rating of IP65, meaning the assembly is sealed against dust intrusion and low-pressure water jets. A housing of titanium-alloyed stainless steel guards the magnets from corrosion and simplifies cleaning in washdown areas. Mechanical fixation is achieved through screw mounting, and the bore pattern aligns with standardized adapter plates for straightforward integration. A cover sheet supplied with the segment shields the magnet face during transport and helps prevent ferrous debris from adhering after installation.