MLS052S-3A-0180-S002 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat MLS052S-3A-0180-S002 is a secondary part from the MLS Synchronous Linear Motors series. It features permanent magnets with a north front and south opposite pole layout and a segment length of 180 mm. The unit is designed with a ferromagnetic base plate, stainless steel magnet cover, and carries an IP65 enclosure rating for protection.
Internal Product Review
MLS052S-3A-0180-S002 is a well-engineered secondary part for MLS synchronous linear motors. IP65 protection and a stainless steel magnet cover support dependable operation in demanding machine environments. A ferromagnetic base plate paired with permanent magnets makes the assembly a strong choice for precise linear motor installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MLS052S-3A-0180-S002 is a secondary component for the Bosch Rexroth Indramat MLS Synchronous Linear Motors series. As the stationary track in a linear motor pair, it works with a moving primary forcer to create direct linear thrust for pick-and-place axes, gantry stages, and transport modules in automated machinery. The secondary requires no power or feedback wiring on the rail itself, reducing potential wear points while supporting precise motion along extended travel paths.
The base plate is made from ferromagnetic steel, providing a low-reluctance return path that increases usable force across the air gap. A line of permanent magnets embedded in the plate establishes the fixed magnetic field required for synchronous operation, so external excitation coils are unnecessary. The assembly has an IP65 protection rating, preventing dust ingress and resisting low-pressure water jets that could otherwise affect its performance. Each magnet row is protected by a nonmagnetic stainless steel sheet cover that resists abrasion and cleaning fluids while maintaining consistent spacing. The segment has a length of 180 mm, allowing multiple sections to be joined for longer travel without interrupting the pole pitch.
Installation uses screw-fastened mounting to hold the segment flush against the machine frame and maintain the intended air gap during acceleration. An additional cover sheet prevents loose chips from contacting the magnet edges. The magnetic orientation places the north pole at the front and the south pole opposite, providing the required field arrangement for successive rail segments. Individual south poles carry an S marking for the south pole, providing a clear visual reference for maintaining polarity continuity across the motion path. Correct alignment of the segments helps preserve a uniform magnetic field where adjoining rail sections meet.
