MLP200D-0120-FT-N0CN-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911322955
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MLP200D-0120-FT-N0CN-NNNN is part of the MLP Synchronous Linear Motors series and features liquid cooling with electrical connections conducted through the front. It delivers a continuous nominal force of 5,560 Newtons and a maximum force of 17,750 Newtons. The motor has a maximum current of 201.5 Amps, a primary mass of 61.3 kilograms, and achieves a nominal velocity of 190 meters per minute.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat builds the MLP200D-0120-FT-N0CN-NNNN as a primary section in the MLP Synchronous Linear Motors series. With a 200 frame motor size, this component functions as a direct-drive actuator that produces linear thrust without mechanical gearboxes or ball screws, making it suitable for high-speed positioning stages, gantries, and machining centers in industrial automation. Because thrust is generated directly along the travel axis, the motor can reduce backlash and wear associated with intermediate transmission components.
The primary generates a continuous force of 5,560 N when supplied with a rated current of 47.5 A. Electrical values include a winding inductance of 4.1 mH and a winding resistance of 0.74 Ω, which affect current rise and copper loss during operation. At full load, the windings release 3,700 W of heat that must be removed by the coolant circuit. Transient demands can reach 201.5 A, and the resulting thrust follows a force constant of 117.3 N/A, while the back EMF scales with travel at a voltage constant of 67.6 Vs/m. Power reaches the coils through leads routed from the front of the housing, and the 10.0 mm² cable cross-section helps limit conductor temperature during high-current cycles. The coil pack is sealed using a thermo-encapsulation method, and no encoder is installed, so position feedback must come from an external sensor.
During installation, the mover experiences an attractive normal force of 25,400 N toward the secondary track, so the supporting structure must withstand that load. Peak propulsion reaches 17,750 N, and a thermal mass of 61.3 kg slows temperature rise during intermittent peaks. The unit uses liquid cooling; maintaining a flow of 5.2 L/min at 2.45 bar keeps winding temperature within limits while supporting a nominal travel speed of 190 m/min and up to 120 m/min at maximum force. Coolant channels run lengthwise through the assembly, and the encoder-free layout supports compact mounting where space around the moving axis is limited.
Frequently Asked Questions about MLP200D-0120-FT-N0CN-NNNN:
Q: What is the continuous nominal force rating of the MLP200D-0120-FT-N0CN-NNNN linear motor?
A: The MLP200D-0120-FT-N0CN-NNNN has a continuous nominal force output of 5,560 N for sustained operation.
Q: What type of cooling method does the MLP200D-0120-FT-N0CN-NNNN motor use?
A: This model utilizes liquid cooling to effectively manage operating temperatures during use.
Q: What is the maximum current supported by the MLP200D-0120-FT-N0CN-NNNN?
A: The maximum current for this linear motor is rated at 201.5 A, enabling high dynamic performance.
Q: Is a motor encoder included with the MLP200D-0120-FT-N0CN-NNNN linear motor?
A: The MLP200D-0120-FT-N0CN-NNNN does not come with a motor encoder installed from the factory.
Q: What is the maximum velocity of the MLP200D-0120-FT-N0CN-NNNN at full force?
A: With the proper setup, this model can reach a maximum velocity of 120 m/min at maximum force output.
