Product Description:

Bosch Rexroth Indramat manufactures the MLP200C-0120-FS-N0CN-NNNN primary section for the MLP Synchronous Linear Motors series. This size 200 linear motor forms the thrust-generating part of a direct-drive system, converting stator current into straight-line motion that positions carriages, gantries, or tooling without mechanical transmissions. In industrial automation, it enables high-speed, high-precision transport, while the liquid-cooled housing and IP65 sealing allow installation in washdown or particulate-laden work zones.

The magnetic circuit produces a force constant of 157.2 N/A, so every ampere of phase current adds that amount of thrust to the mover. During continuous duty, the motor delivers a nominal force of 4460 N at 190 m/min and draws a rated current of 28.4 A. Copper losses are influenced by a winding resistance of 1.76 ohms at 20 °C, while dynamic behavior is shaped by a winding inductance of 9.0 mH. A 90.7 Vs/m voltage constant indicates the back EMF seen by the drive. Liquid cooling uses a coolant flow of 3.9 l/min, while front-routed power leads use 6.0 mm² conductors. The fluid path tolerates a 2.0 bar pressure drop and supports operation up to a maximum force of 14 250 N or 120 m/min when fully loaded. Standard encapsulation protects the windings, and no motor encoder is installed, so position feedback must be supplied externally.

An attractive force of 20 500 N pulls the secondary track against its iron rail, so mounting hardware must withstand that preload while sustaining the peak thrust. Coolant supply infrastructure must also accommodate a maximum inlet pressure of 10.0 bar to ensure reliable thermal transfer. Under rated electrical and hydraulic conditions, the motor dissipates 2700 W without overheating. The enclosure carries an IP65 rating that blocks dust ingress and water jets, which complements the front-side wiring scheme and allows the unit to be embedded directly in moving machine axes without added protective enclosures.