Product Description:

The MLP200B-0120-FS-N0CN-NNNN is a primary section within the MLP Synchronous Linear Motors series produced by Bosch Rexroth Indramat. This linear motor segment generates direct thrust along a flat secondary track, eliminating mechanical transmissions in automated handling systems, gantries, and pick-and-place modules. As the active component, it houses the windings while the passive secondary rail carries the permanent magnets. By converting electromagnetic interaction directly into linear force, the unit supports precise positioning and repeatable high-speed moves required in modern production lines and machine tools.

Thermal management is handled by liquid cooling, so waste heat is removed through an internal channel and operating temperature remains stable during continuous duty. The active face width corresponds to size code 200, which provides a larger magnetic surface for higher continuous thrust, and length code B indicates the coil stack depth that sets the achievable force constant without increasing the overall width. For cabling, power is introduced through wires conducted through the front, allowing the section to be mounted flush against the machine frame on the other three sides, and the motor is supplied with no encoder installed, so position feedback must be provided by an external linear scale or resolver mounted on the axis.

The coils are potted with a standard encapsulation method, which protects the windings against vibration and contamination while maintaining a predictable thermal path to the cooling jacket. Identical primary sections can be placed in parallel on the same secondary rail when higher force is needed from the axis. A dedicated coolant manifold distributes coolant through each segment in series so that temperature stays uniform during long acceleration profiles.