Product Description:

The MLP200B-0040-FS-N0CN-NNNN belongs to the MLP Synchronous Linear Motors series manufactured by Bosch Rexroth Indramat. It is a primary section designed to create direct linear thrust for positioning stages, gantries, or transfer systems that require high force density without mechanical transmissions. By integrating into an automation axis, it converts drive current into linear motion along a track, allowing fast acceleration and precise velocity regulation inside industrial machinery. Because the motor acts directly on the moving axis, it supports drive layouts that avoid backlash from belts, screws, or gear trains and help maintain smooth travel during repeated motion cycles.

This model delivers a continuous thrust of 3465 N, which is the force it can sustain during ongoing operation without exceeding its thermal limits. Heat generated by the windings is removed through liquid cooling, so the coil temperature stays stable even when the motor is driven up to the peak line current of 70 A. For short duty cycles, the motor can reach a peak thrust of 10900 N, giving additional headroom for rapid starts or sudden load changes. Under rated operating conditions, the carriage can travel at 100 m/min, a speed that supports high-throughput motion while keeping the thermal load under control. Electrical conductors are routed through the front of the housing, which can simplify cable management in compact machine layouts, and the coils are protected by standard resin encapsulation that helps shield the copper from vibration and moisture.

When the full load is applied, the axis speed is limited to 40 m/min to maintain stable magnetic operation and controllable motion. The continuous supply requirement is 13 A, which helps match the motor to a suitable inverter for steady-state use. With a motor size of 200 and a length code B, the active section fits medium-stroke systems without adding unnecessary bulk to the moving assembly. Winding code 0040 identifies the electrical characteristics expected by compatible Rexroth linear drives. The motor does not include an integrated encoder, so closed-loop operation requires an external position transducer mounted along the axis.