Product Description:

The MLP200A-0120-FS-N0CN-NNNN is a primary section from the MLP Synchronous Linear Motors series produced by Bosch Rexroth Indramat. Its stainless-steel and titanium alloy housing resists corrosion, while a standard encapsulation method seals the windings against coolant ingress. Wiring is routed through the front of the body, allowing short, protected cable runs inside the machine frame. Length code A and size 200 determine the magnetic track engagement and overall footprint, making the unit suitable for mid-span gantries. Because no encoder is installed, position feedback must be supplied by an external scale or another sensing device integrated into the axis.

During continuous operation, the mover can sustain a thrust of 2415 N, which suits conveyor shuttles and tooling slides that require pushing force without overheating. Heat generated by the windings is removed through liquid cooling; coolant channels running beneath the coils keep the copper below its thermal limit even when the drive delivers the permitted 88 A of phase current. When that current produces the maximum allowable force, the carriage speed is limited to 120 m/min to protect the magnetic circuit and the bearings. The laminations in its iron-core stator concentrate flux so the motor can achieve high force density within the available cross-section.

For short bursts, the motor can generate a peak thrust of 7450 N, enabling rapid acceleration of payloads before returning to the rated operating current of 16 A. In production cycles that rely on constant traverse speeds, the drive is tuned to a nominal velocity of 190 m/min, giving a clear setpoint around which servo algorithms can regulate. An IP65 protection class permits installation on open machine frames where sprayed coolant or airborne particles are present, extending the usefulness of the liquid-cooled linear motor to welding stations, packaging lines, and machining centers alike.