Product Description:

The MLP152D-0060-FT-N0CN-NNNN is a primary section in the MLP Synchronous Linear Motors series from Bosch Rexroth Indramat. Designed for industrial automation, this mover generates controlled linear thrust when energized by a compatible inverter and paired with a magnetic secondary track. It serves in gantry loaders, machining centers, and high-speed pick-and-place modules, where direct electromagnetic propulsion removes mechanical transmissions, lowers wear, and maintains repeatable positioning across the 152 mm frame width. This direct-drive arrangement also supports rapid reversals and smooth travel on axes that cycle frequently.

The section delivers a maximum force of 10000 N and develops thrust in proportion to a force constant of 200.4 N/A. Back EMF is characterized by a voltage constant of 115.6 Vs/m, which helps determine the required drive-controller voltage. A winding resistance of 2.24 Ω and an inductance of 34.0 mH result from the 0060 coil design wrapped around a 30.0 mm pole width. Continuous operation draws 28.0 A, while a static attractive force of 19000 N pulls the slider toward the iron core. Conductors exit through the front housing for straightforward routing, and the thermo-encapsulation method stabilizes the copper against vibration and heat. No encoder is installed, so external position feedback must be provided through the control system.

Liquid cooling passes through a 0.176 l internal channel, and a flow of 4.4 l/min causes a pressure drop of 1.9 bar while removing up to 3100 W of heat. Under this thermal regimen, the mover sustains a nominal thrust of 4750 N. Current may rise transiently to 93.2 A for acceleration, allowing the carriage to reach a rated top speed of 60 m/min at full force. The cooling circuit must remain active to maintain continuous thrust during sustained motion.