Product Description:

The MLP152C-0060-FT-N0CN-NNNN is a primary section in the MLP Synchronous Linear Motors series from Bosch Rexroth Indramat. As a synchronous linear motor assembly, it converts stator current directly into axial thrust for transport axes, pick-and-place modules, and gantry stages where mechanical transmissions are unnecessary. This arrangement provides precise force control along a flat track and removes backlash from intermediate transmission elements. Because thrust is produced directly in the linear axis, the drive can respond quickly to command changes. It is suited to applications that cycle repeatedly over long travel paths.

Liquid cooling carries heat away from the active windings, allowing the unit to sustain its nominal thrust of 3900 N while holding a continuous travel velocity of 150 m/min. The winding uses code 0060 and a thermo-encapsulation process that resists vibration and improves dielectric strength, while leakage capacitance is limited to 22.0 nF to keep drive-side filtering requirements modest. The maximum phase current is 58.3 A, and the housing has an IP65 rating to resist dust and low-pressure water jets. With a motor size 152 frame, the linear module has a depth of 208 mm, and the supply leads are routed through the front face for straightforward daisy-chaining in long tracks.

For short bursts, the unit can deliver a peak force of 7800 N and maintain speeds up to 60 m/min at that load. During nominal operation, the rated phase current is 22 A, which helps reduce losses during standstill magnetic clamping. The iron-core assembly has a total height of 73.9 mm and a width of 660 mm, while the mass is 35.000 kg, which helps keep carriage inertia moderate in high-cycle positioning. This version has no encoder, so an external measuring system can be selected to match the required motion accuracy for the application.