MLP100C-0090-FT-N0CN-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911318142
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MLP100C-0090-FT-N0CN-NNNN is part of the MLP Synchronous Linear Motors series. This motor features a continuous nominal force of 2310 Newtons and uses liquid cooling with a coolant flow of 2.3 liters per minute. It offers a maximum current of 83.6 Amps and operates at a nominal velocity of 170 meters per minute.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MLP100C-0090-FT-N0CN-NNNN is a primary section from the MLP Synchronous Linear Motors series produced by Bosch Rexroth Indramat. With motor size 100 and winding code 0090, this liquid-cooled linear motor supplies direct thrust to Cartesian stages and gantry systems, eliminating ballscrews or belts in high-speed positioning lines within industrial automation. Its linear design allows force to be applied directly to the moving axis without mechanical conversion components between the motor and the load.
The motor supplies a continuous thrust of 2310 N while drawing a rated current of 12.1 A. That force level is achieved efficiently because each ampere produces 191.30 N/A, which helps with drive sizing. Internally, the copper coils have a winding resistance of 6.0 Ω and an inductance of 35.3 mH; these values affect current ripple and the response of the servo amplifier. A generated back EMF of 110.4 Vs/m relates velocity to voltage feedback for the controller. Under continuous duty, the active section dissipates 1600 W, so adequate coolant circulation is required to keep the teeth and winding temperature within acceptable limits.
Thermal management is handled by liquid cooling through a 0.212 L duct, requiring a flow of 2.3 l/min and creating only 0.8 bar of pressure drop at that minimum rate. The stator can accept up to 83.6 A for short periods to generate a maximum thrust of 7150 N, while mechanical attraction to the secondary track reaches 10,400 N. Nominal travel speed is 170 m/min, and when the motor is loaded to its maximum continuous force, velocity is limited to 90 m/min. Electrical leads are routed from the front face, and the thermo-encapsulation method protects the coil pack against vibration and coolant ingress. Because no encoder is installed, position feedback must be supplied by an external scale. The primary section weighs 29.7 kg, and its winding layout keeps power loss predictable in repetitive motion profiles.
Frequently Asked Questions about MLP100C-0090-FT-N0CN-NNNN:
Q: What is the continuous nominal force rating of the MLP100C-0090-FT-N0CN-NNNN linear motor?
A: The MLP100C-0090-FT-N0CN-NNNN provides a continuous nominal force output of 2310 N for sustained linear motion.
Q: What type of cooling does the MLP100C-0090-FT-N0CN-NNNN linear motor use and what is the required flow rate?
A: This model uses liquid cooling with a required coolant flow rate of 2.3 liters per minute to manage operating temperatures.
Q: What is the maximum velocity at full force for the MLP100C-0090-FT-N0CN-NNNN?
A: The maximum velocity at maximum force for this linear motor is 90 meters per minute.
Q: How is the electrical connection configured on the MLP100C-0090-FT-N0CN-NNNN?
A: The electrical connection for this model is achieved by wires conducted through the front end of the motor.
Q: Does the MLP100C-0090-FT-N0CN-NNNN come with an integrated encoder?
A: No encoder is installed on the MLP100C-0090-FT-N0CN-NNNN, so external position feedback must be added if required.
