Product Description:

The MLP100A-0190-FT-N0CN-NNNN is a primary section from the MLP Synchronous Linear Motors series produced by Bosch Rexroth Indramat. It creates direct thrust along a track for precise translation in automated tooling, gantries, and pick-and-place stations. The unit belongs to the size-100 frame and uses winding code 0190, placing it in the medium-force range of the manufacturer’s modular motion platform. It dispenses with mechanical transmissions, so position accuracy is dictated by the servo loop rather than gears or belts.

Under continuous operation, the motor delivers a thrust of 1180 N while drawing a rated phase current of 11.9 A. That force comes from a coil whose force constant is 99.5 N/A, so nearly one hundred newtons are produced per ampere. Motion-induced voltage follows a back-EMF constant of 57.4 Vs/m. Electrical dynamics are set by a winding inductance of 16.5 mH and a resistance of 3.0 Ω. Heat is removed by liquid cooling that flows through the housing, and the coils are secured with a thermo-encapsulation method. Power enters through the front of the forcer, aiding tight cable routing. The active face has a 37.5 mm pole pitch, and nominal speed is 290 m/min within thermal class 155 F limits.

Dynamic moves can call for a peak thrust of 3750 N, obtainable when the inverter supplies up to 69.2 A. Even at that load, the 17.0 kg mover stays within the F-class thermal envelope because the liquid circuit removes heat. Maximum speed at full force is 190 m/min, which keeps the induced voltage within the operating range of the winding. The housing is sealed to IP65, so chips and coolant do not enter the forcer on open machinery. No encoder is fitted, so external feedback must be provided. The body length and magnetic layout help keep attraction forces balanced along the track.