Product Description:

The MLP070C-0150-FT-N0CN-NNNN is a synchronous linear motor primary section produced by Bosch Rexroth Indramat in the MLP Synchronous Linear Motors series. It provides direct electromagnetic thrust along a fixed magnet track, eliminating gearboxes or ball screws and allowing high-speed positioning in gantry stages, pick-and-place heads, and machining centers. Acting as the moving drive element, it interacts with the secondary track to translate servo commands into precise, repeatable linear motion for industrial automation tasks. It is intended for machine axes where a direct linear drive is preferred over rotary-to-linear conversion components.

The unit has motor size 070, which sets the active iron width and the force capability of the carriage. Its coil assembly uses winding code 0150, giving the resistance and inductance values expected by a compatible drive. Heat generated by the conductors is removed by liquid cooling, and internal channels carry coolant close to the copper windings to stabilize temperature during continuous duty. The power conductors are routed through the front, which simplifies cable-chain layout on moving axes. All windings use a thermo-encapsulation method that improves vibration resistance and helps protect the assembly from fluids or chips on production lines. This cooling method supports stable thermal behavior during long operating cycles.

Because the motor ships with no encoder installed, position feedback must come from an external linear scale or from drive estimation when open-loop operation is acceptable. This primary section works with a matched secondary strip to generate controlled linear thrust along the travel axis. The assembly uses the same mechanical interface and magnetic pitch across the product line, which supports use in conveyor, palletizing, and XY portal axes. Compatible amplifiers can align phase currents through the selected feedback device during closed-loop operation.