MLP070A-0220-FS-N0CN-NQNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911341431
Ask for AvailabilityThe Bosch Rexroth Indramat MLP070A-0220-FS-N0CN-NQNN is part of the MLP Synchronous Linear Motors series and features liquid cooling with a coolant flow of 1.1 liters per minute. This linear motor offers a continuous nominal force of 550 Newtons and a maximum velocity of 220 meters per minute. It also has a primary part mass of 8.4 kilograms and supports a maximum current of 40.5 Amps.
Internal Product Review
The MLP070A-0220-FS-N0CN-NQNN is a Bosch Rexroth Indramat synchronous linear motor with liquid cooling and 550 N continuous nominal force. A 90.70 N/A force constant and 360 m/min nominal velocity make the motor a strong choice for fast, efficient linear motion.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MLP070A-0220-FS-N0CN-NQNN primary section is produced by Bosch Rexroth Indramat and belongs to the MLP Synchronous Linear Motors series. As a liquid-cooled synchronous linear motor, it generates thrust directly along the axis, which removes the need for belts, screws, or gear transmissions in many motion systems. The primary section works with a passive secondary track to convert controlled electrical current into linear force for pick-and-place modules, gantry axes, and machining centers. This arrangement supports precise positioning and repeatable travel speed in applications that require direct linear motion.
The unit delivers a continuous force of 550 N when coolant circulates through the stator, allowing steady operation without thermal overload. Its force constant is 90.70 N/A, so thrust rises in a predictable relationship with motor current. Rated phase current is 6.1 A, and short acceleration periods may draw up to 40.5 A. The cooling circuit requires 1.1 L/min through a 0.042 L duct and removes 780 W of heat. The winding has an inductance of 26.9 mH and a resistance of 4.7 ohms at 20 °C, which gives the motor electrical characteristics suited to standard IndraDrive amplifiers. The voltage constant is 52.3 Vs/m, the wires exit at the front, the housing uses the standard encapsulation method, and no encoder is installed.
The primary section can reach a peak force of 2000 N for brief intervals when higher thrust is required to overcome static friction or heavy process loads. During normal positioning duty, it reaches a nominal travel speed of 360 m/min, while operation at maximum permissible force limits speed to 220 m/min. The unit weighs 8.4 kg, corresponds to motor size 070, and uses length code A to fit narrow carriage layouts. An attractive force of 2900 N maintains magnetic coupling to the track. Thermal response is quick because the motor has a time constant of 2.4 min, so temperature changes follow load and coolant-flow changes without a long delay.
