Product Description

The MKE118B-024-CG0-KE6 synchronous motor manufactured by Bosch Rexroth is used with a drive from the same manufacturer. The motor should not be put to use for applications that are not intended by the manufacturer. The device is intended to operate at a maximum temperature of 40℃. The unit is equipped with a radial shaft sealing ring. It has an IP 65 degree of protection in accordance with IEC 60529 specifications. The product has a weight of 45kg. The synchronous motor portrays a brushless design. The device features a high-performance design. The unit installation must be carried out as per the instructions specified in the associated documentation.

The motor is a good choice for deployment in machine tools. The drive used with this product is designed to be operated only if the application adheres to the national EMC regulations. The device comprises a frame length of B. It does not have any holding brake. The unit depicts a continuous current rating of 15.3A at 60K in standstill mode. The product is equipped with a B5 motor design as per EN 60034-7/1993 specifications for all installation positions. This device comprises a cylindrical shaft end. The MKE118B-024-CG0-KE6 motor is backed by a one-year warranty and is sent to any address through reputed freight carriers.

The associated drive positions the motor and controls its speed based on the current position of this motor. The temperature analysis of the product is done using integrated PTC thermistors. The device operation should always be done only with the manufacturer’s IndraDrive and DIAX04 drive controllers. It is not meant to be used with drive controllers from other manufacturers. The motor housing has to be protected against corrosion due to aggressive materials such as salt mists, cutting oils, lubricants and certain coolants. This motor should be grounded above the motor cable with a grounded connector that has a minimum of 4mm² cross-section.