MKE118D-035-CP0-KE6 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911347229
Ask for AvailabilityThe Bosch Rexroth Indramat MKE118D-035-CP0-KE6 is a servo motor from the MKE Synchronous Motors series, designed for potentially explosive areas with ATEX compliant housing. This model features a maximum torque of 187 Nm, a maximum speed of 3000 revolutions per minute, and an IP65 protection rating. It uses an optical multiturn absolute Hiperface encoder with 128 increments and has a shaft with a DIN 6885 keyway.
Internal Product Review
The MKE118D-035-CP0-KE6 is a servo motor for potentially explosive areas engineered for dependable hazardous-location service. ATEX compliance and IP65 protection make the design especially well suited for demanding industrial environments. Continuous standstill torque of 48.0 Nm and peak torque of 187.0 Nm give the motor excellent torque density for serious servo duty.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKE118D-035-CP0-KE6 is a servo motor manufactured by Bosch Rexroth Indramat for the MKE Synchronous Motors series. As a flameproof unit for potentially explosive areas, it delivers closed-loop rotary power to conveyors, mixers, and positioning stages where conventional motors are not permitted. Its ATEX-compliant housing allows safe operation in gas or dust zones and supports use with certified drive controllers in hazardous-area automation cells. This motor is intended for applications that require controlled torque and speed while meeting explosion-protection requirements.
During continuous standstill with a 60 K winding temperature rise, the motor supplies 48.0 Nm while drawing 29.8 A, giving stable stall performance for speed-controlled loads. For short accelerations, it can withstand 187.0 Nm of torque and up to 134.3 A RMS current, allowing rapid indexing. The mechanical output peaks at 3000 rpm, so gearbox selection must account for the available speed range. A multiturn optical Hiperface encoder, model M1, provides absolute position feedback with 128 increments per revolution, while the rotor inertia of 0.03620 kg·m² balances responsiveness and load damping. The 3.20 mH winding inductance, 0.210 Ω resistance, and 20.2 nF discharge capacitance affect the electrical response of the drive and its filter design.
Winding code 035 and a voltage constant of 114.5 V/1000 rpm produce 1.87 Nm/A, giving predictable torque gain in the control loop. Protection is provided by the IP 65 rating, an ATEX-tested housing, a shaft seal, and a terminal box mounted on top of the frame with 17.0 to 19.5 mm cable entries. Operation is permitted from 0 to +40 °C, and Class F insulation tolerates internal heating beyond ambient conditions. The motor runs without a holding brake, uses a shaft with a DIN 6885 keyway for torque transfer, emits 61.1 dB[A] at one meter, and has a total mass of 65.0 kg.
