MKE118D-035-AP0-KUN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911370791
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MKE118D-035-AP0-KUN is part of the MKE Synchronous Motors series and is designed as a servo motor for potentially explosive areas. It features a continuous torque at standstill of 48 Nm, a maximum torque of 187 Nm, and a maximum velocity of 3000 per minute. This motor has IP65 protection, weighs 65 kilograms, and meets UL/CSA housing standards.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKE118D-035-AP0-KUN is a servo motor produced by Bosch Rexroth Indramat as part of the MKE Synchronous Motors series. Designed for use in potentially explosive industrial areas, the unit converts electrical energy into controlled mechanical rotation for positioning and speed-regulated duties. It follows UL/CSA housing guidelines and uses a shaft with a DIN 6885 keyway for coupling to gearboxes or load shafts. Power and feedback leads exit from the top through a sealed terminal box, and the motor is supplied without a holding brake.
At a 60 K winding temperature rise, the motor can deliver a continuous torque of 48.0 Nm while drawing a standstill current of 29.8 A. These values show how much load the motor can carry continuously when it is held at zero speed. Electromagnetic behavior is further characterized by a phase inductance of 3.20 mH, which affects the rate of current change and influences servo bandwidth. Copper losses are tied to a phase resistance of 0.210 Ohm measured at 20 °C, providing a useful reference for thermal calculations. Mechanical response is also influenced by the rotor inertia of 0.03620 kgm², so the connected drive must account for stored rotational energy during rapid acceleration and deceleration.
Beyond the continuous operating point, the motor can generate up to 187.0 Nm of peak torque for short periods, giving the axis added force to overcome breakaway friction or sudden load changes. Speed capability is limited to 3000 rpm, and during brief overload conditions the drive may command currents approaching 134.3 A RMS. The enclosure has an IP 65 rating, and the shaft seal helps protect the interior against dust and low-pressure water jets. The stated ambient operating range of 0 to 40 °C should be observed so the motor can maintain its expected thermal performance during normal service.
Frequently Asked Questions about MKE118D-035-AP0-KUN:
Q: What is the maximum velocity of the MKE118D-035-AP0-KUN servo motor?
A: The MKE118D-035-AP0-KUN servo motor achieves a maximum velocity of 3000 min⁻¹.
Q: What is the continuous torque at standstill for the MKE118D-035-AP0-KUN servo motor?
A: This model provides a continuous torque at standstill of 48.0 Nm when operating at 60K.
Q: What shaft design does the MKE118D-035-AP0-KUN feature?
A: The shaft of the MKE118D-035-AP0-KUN is designed with a keyway and seal, following the DIN 6885 standard.
Q: What type of encoder and increment configuration is included in the MKE118D-035-AP0-KUN servo motor?
A: The MKE118D-035-AP0-KUN utilizes a singleturn optical encoder with Hiperface protocol and supports 128 increments.
Q: What level of environmental protection does the MKE118D-035-AP0-KUN provide?
A: This motor has an IP65 rating, making it resistant to dust and low-pressure water jets.
