MKE118D-027-NG3-KE4 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911306685
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MKE118D-027-NG3-KE4 is a servo motor designed for potentially explosive areas, and is part of the MKE Synchronous Motors series. It features an IP65 rating, meets the ATEX housing standard, and has a plain shaft with a DIN 332 compliant thread and frontal centering hole. The motor provides a continuous torque of 48.0 Nm at standstill, a maximum torque of 187.0 Nm, and weighs 65 kg without the brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat MKE118D-027-NG3-KE4 is a servo motor for potentially explosive areas in the MKE Synchronous Motors series. It drives machinery in process lines where precise torque and compliance with hazardous-zone directives are required in industrial automation. The motor mounts with its power and feedback leads routed upward because the connections are on the top of the terminal box, which accepts conduits through cable entries from 13.0 mm to 16.0 mm. It operates in ambient temperatures from 0 °C to +40 °C and weighs 65.0 kg without the brake. A plain shaft with a frontal centering hole and a DIN 332 DS thread supports coupling to gear stages.
During continuous duty at a 60 K winding temperature rise, the motor sustains 48.0 Nm of torque while drawing 22.1 A. The 027 winding code corresponds to electrical values of 5.70 mH inductance, 0.350 Ω resistance, and 20.2 nF capacitance, allowing stable current loops. A built-in holding brake rated at 70 Nm secures vertical axes when power is removed. For dynamic motion, the rotor can reach 3000 rpm and deliver up to 187.0 Nm, and such peaks can require as much as 99.6 A RMS from the drive amplifier. The shaft seal helps limit the entry of oil or dust, and the sound pressure level is 61.1 dB(A) ±3 during operation.
The motor has an ATEX-certified housing and an IP65 enclosure that blocks dust and water jets. Class 155 F insulation permits prolonged copper temperatures, while the steel rotor inertia of 0.03620 kgm² balances acceleration with load smoothing. The electromagnetic design yields a torque constant of 2.52 Nm/A, and the voltage constant is 154.5 V per 1000 rpm. These ratings suit use in process equipment such as chemical mixers and grain handling conveyors, where sealed construction and hazardous-area approval are required.
Frequently Asked Questions about MKE118D-027-NG3-KE4:
Q: What is the maximum operating speed of the MKE118D-027-NG3-KE4 motor?
A: The MKE118D-027-NG3-KE4 motor operates with a maximum velocity of 3000 min⁻¹.
Q: Does the MKE118D-027-NG3-KE4 feature a holding brake and what is its torque capacity?
A: This model includes a holding brake capable of providing up to 70 Nm of torque.
Q: What housing safety standard does the MKE118D-027-NG3-KE4 comply with?
A: The MKE118D-027-NG3-KE4 is certified to meet the ATEX housing standard for safety in potentially explosive areas.
Q: What type of shaft design and threading does the MKE118D-027-NG3-KE4 use?
A: This servo motor features a plain shaft with a frontal centering hole and a DIN 332 compliant 'DS' thread.
Q: What level of ingress protection does the MKE118D-027-NG3-KE4 provide?
A: The MKE118D-027-NG3-KE4 is protected to IP65, ensuring a high level of resistance to dust and water ingress.
