MKE118D-027-BG0-KUN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911323115
Ask for AvailabilityThe Bosch Rexroth Indramat MKE118D-027-BG0-KUN is a servo motor from the MKE Synchronous Motors series designed for potentially explosive areas. It offers a maximum torque of 187.0 Nm, a continuous current at standstill of 22.1 A, and features an optical singleturn EnDat2.1 encoder with 2,048 increments. The motor has a plain shaft with a DIN 332 compliant thread, weighs 65 kg, and is rated for IP65 protection. The housing complies with UL/CSA standards and the ambient temperature range is 0 to 40 degrees Celsius.
Internal Product Review
The MKE118D-027-BG0-KUN is a servo motor for potentially explosive areas with IP65 protection. Optical singleturn EnDat2.1 feedback and 2,048 encoder increments support precise motion control and dependable positioning accuracy. Continuous standstill torque of 48.0 Nm and peak torque of 187.0 Nm make this unit a strong choice for demanding servo applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKE118D-027-BG0-KUN belongs to the MKE Synchronous Motors series produced by Bosch Rexroth Indramat. Classified as a servo motor for potentially explosive areas, it converts drive output from compatible controllers into rotational motion where ignition-protected equipment is required. A terminal box mounted on the top of the housing provides power and feedback terminations, and the unit is intended for ambient temperatures from 0 to +40 °C. This arrangement keeps the electrical connections enclosed and supports protected cable routing in enclosed machine installations.
During continuous operation at a 60 K winding temperature rise, the motor delivers 48.0 Nm while drawing 22.1 A, which indicates the continuous standstill load it can sustain thermally. For short acceleration bursts, the shaft can produce 187.0 Nm with an RMS current of 99.6 A. The electromagnetic design yields a torque constant of 2.52 Nm/A and a back-EMF constant of 154.5 V per 1000 rpm. These values are associated with winding code 027, a 5.70 mH phase inductance, and 0.350 Ω resistance measured at 20 °C. The motor also has a discharge capacitance of 20.2 nF for proper grounding of inverter-generated common-mode voltage. The housing follows UL/CSA construction rules, uses class 155 (F) insulation, and comes without a holding brake.
The shaft can spin up to 3000 rpm, a speed supported by a rotor inertia of 0.03620 kg·m² that balances dynamic response with load damping. Overall weight is 65.0 kg, and the enclosure carries an IP65 rating plus a shaft seal to block dust and water jets. A plain shaft with a frontal centering hole and a DIN 332 DS thread simplifies coupling alignment. Sound pressure during nominal running is 61.1 dB(A) ±3 dB. Position data are supplied by an optical single-turn EnDat 2.1 encoder with 2,048 increments, allowing accurate feedback for closed-loop speed and position control.
