MKE118D-012-AG0-KUN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911378559
Ask for AvailabilityThe Bosch Rexroth Indramat MKE118D-012-AG0-KUN is part of the MKE Synchronous Motors series and is designed as a servo motor for potentially explosive areas. It features a continuous torque at standstill of 48.0 Nm and a maximum torque of 187.0 Nm, with a maximum velocity of 2000 min⁻¹. This unit has an IP65 rating, weighs 65 kilograms, and uses an optical encoder with singleturn Hiperface.
Internal Product Review
The MKE118D-012-AG0-KUN is a servo motor for potentially explosive areas with IP65 protection. Continuous standstill torque of 48.0 Nm and maximum torque of 187.0 Nm give this MKE synchronous motor impressive low-speed strength and strong dynamic reserve. The optical singleturn Hiperface encoder adds precise feedback, making the unit an excellent choice for hazardous-duty motion systems.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKE118D-012-AG0-KUN is a three-phase synchronous servo motor produced by Bosch Rexroth Indramat within the MKE Synchronous Motors series. Intended for potentially explosive areas, it provides controlled rotary power to mixers, agitators, or conveyors where ignition-source classification is critical. An optical single-turn Hiperface encoder, model S1 with 128 increments, is integrated for position feedback, and all power and feedback conductors enter through a top-mounted terminal box. The unit is supplied without a holding brake, so static load retention must be provided by the machine or the drive.
Under steady thermal conditions of 60 K, the motor delivers 48.0 Nm of continuous standstill torque while drawing 13.0 A of continuous current. The housing carries an IP65 rating, so dust ingress is prevented and jet water cleaning is permitted in washdown cells. For transient acceleration, the winding can reach a maximum RMS current of 58.5 A and produce up to 187.0 Nm of peak torque. Mechanical speed is limited to 2000 rpm, and the rotor balance and bearing set keep vibration within a 61.1 dB[A] sound level. The discharge capacitance of 20.2 nF influences common-mode currents, and a back-EMF constant of 263.5 V per 1000 rpm helps with inverter voltage selection.
Thermal management is supported by Class F insulation and a permissible ambient range of 0 to 40 °C. Within that temperature window, the frame weighs 65.0 kg and dissipates losses through its UL/CSA-compliant housing. Electromechanical responsiveness is set by a torque constant of 4.29 Nm/A and a winding inductance of 15.000 mH, values that affect current loop bandwidth in the drive controller. The laminated rotor has an inertia of 0.03620 kg·m², which supports smooth speed regulation on long conveyor or mixer shafts. The motor has a plain shaft with a DIN 332 DS thread and a frontal centering hole. It also has a shaft seal, top-mounted connections, winding code 012, and a resistance of 0.98 Ω.
