Product Description:

The MKE116B-024-PG0-KN is a servo motor produced by Bosch Rexroth Indramat and assigned to the MKE Synchronous Motors series. It serves as the rotating axis element inside automated filling, mixing, or packaging machines that operate under closed-loop control. By supplying precise torque and speed feedback to the drive controller, the motor helps maintain repeatable motion profiles in production lines that must keep steady throughput even when installed in hazardous industrial areas.

The electrical interface uses a terminal box cast onto the stator housing, and conductors leave the machine through the top cover because the connection orientation is top-mounted. Inside the frame, winding code 024 identifies the electrical characteristics and thermal limits that the compatible IndraDrive amplifier must observe during acceleration and continuous duty. As supplied, the motor is delivered without a holding brake, so any load-side position retention must be provided by drive torque or an external clamping element. A factory-installed shaft seal sits behind the output collar to block coolant mist, fine dust, or process vapors from reaching the bearing lubrication path and winding insulation.

As a certified servo motor for potentially explosive areas, the housing, winding insulation, and terminal gasket materials are selected to prevent hot spots that could ignite surrounding gases. The output member is a plain shaft machined to ISO tolerances and provided with a frontal centering hole for coaxial alignment of couplings, pulleys, or incremental encoders. A DIN 332-compliant DS thread in the shaft end allows a puller to remove the mounted element without damaging adjacent bearing seats. This arrangement supports accurate alignment while preserving the sealed motor layout during installation and service.