MKE098B-047-KP0-BUNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911299766
Ask for AvailabilityThe Bosch Rexroth Indramat MKE098B-047-KP0-BUNN is a servo motor from the MKE Synchronous Motors series, designed for potentially explosive areas and complies with UL/CSA housing standards. It features a maximum torque of 43.5 Nm, a continuous torque of 12.0 Nm at standstill, and operates at a maximum velocity of 4500 revolutions per minute. The motor includes a shaft with a DIN 6885 keyway, a terminal box connection on the B-side, and weighs 18 kg.
Internal Product Review
The MKE098B-047-KP0-BUNN is a Bosch Rexroth Indramat servo motor for potentially explosive areas designed for dependable industrial motion service. Standstill performance is impressive, with 12.0 Nm continuous torque and 43.5 Nm maximum torque supporting demanding drive applications. UL/CSA compliance and insulation class 155 (F) make this unit a strong choice for safety-focused installations.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKE098B-047-KP0-BUNN servo unit is built by Bosch Rexroth Indramat within the MKE Synchronous Motors series. Designed for use in potentially explosive areas, the motor provides controlled rotary motion for processing lines and material-handling cells. Power and feedback connections pass through a terminal box on side B, and the shaft uses a DIN 6885 key so torque can be transferred to external machine elements without slip. Its enclosure and connection layout support use in machines where sealed routing and predictable mechanical coupling are important.
At a 60 K winding rise, the motor can deliver a continuous torque of 12.0 Nm with a continuous standstill current of 9.8 A. The magnetic system supports a peak torque of 43.5 Nm, and the drive can draw up to 44.3 A RMS during short transient events. A torque constant of 1.41 Nm/A links commanded current to mechanical output, while a back-EMF constant of 91.0 V per 1000 rpm helps match the motor to a suitable drive. Electrical characteristics include 1.20 mH phase inductance, 8.400 Ω phase resistance, and 6.7 nF discharge capacitance. Class 155 F insulation and a UL/CSA-compliant housing support thermal stability, while the motor comes without a holding brake. A shaft seal helps limit dust ingress, and airborne noise is rated at 61.8 dB(A) ±3.
For dynamic duty, the rotor can accelerate to 4500 rpm, and its low rotational inertia of 0.00430 kg·m² supports rapid speed changes without placing excessive demand on the drive amplifier. This response is useful on axes that start and stop often, where quick reversals and short cycle times are required. The 047 winding variant is intended to balance response time against switching losses, and the total motor mass of 18.0 kg gives the assembly a stable mechanical presence during mounting and operation. The permitted ambient operating range is 0 to +40 °C, so incoming air must remain within that band when the motor is installed in enclosed or dust-tight equipment.
