Product Description:

The MKE096B-047-NG0-KN is a Bosch Rexroth Indramat servo motor in the MKE Synchronous Motors series. It is intended for drive tasks inside potentially explosive production areas where certified surface temperatures and low leakage paths are mandatory. Within an automation line, it converts the regulated current from a compatible inverter into rotational motion that can be passed to gearboxes, lead screws, or belt stages used for material transport, indexing, or tooling.

This model employs a 047 winding, giving coil parameters matched to medium-voltage drives while minimizing thermal rise. The motor uses a top connection direction, so motor leads drop directly to roof-mounted cable trays in vertical enclosures. All conductors terminate in a cast aluminum terminal box, allowing armored conduit and strain relief to be fastened without adapters. A plain shaft reduces coupling complexity because no keyway or serration needs alignment, and the machined frontal centering hole lets installation tools stabilize the rotor during precise mounting. This arrangement supports orderly cable routing and steady mechanical alignment during installation.

The threaded extraction point uses the DIN 332 'DS' thread, allowing compatibility with standardized pullers. This variant ships without a holding brake, so static load retention relies on drive torque or an external mechanical lock. A positive-lip shaft seal sits behind the front bearing to keep coolant mist or dust from entering the motor interior and shortening lubricant life. Because it is a servo motor for potentially explosive areas, every exposed surface and junction box is arranged to limit hot-spot formation while still permitting rapid acceleration cycles typical of pick-and-place, valve actuation, and filling equipment operating in classified industrial zones.