Product Description:

The MKE096B-047-KP1-KN servo motor is produced by Bosch Rexroth Indramat within the MKE Synchronous Motors series. It is intended for precision axis control in automated lines, where the motor converts regulated current from a drive into stable torque and speed for repeatable motion. This operating role makes it suitable for indexing stations, transfer systems, and similar equipment that depend on controlled acceleration and accurate stopping. Its construction is suitable for equipment installed in potentially explosive areas such as chemical processing, paint finishing, and grain handling plants, where enclosed motor components and controlled surfaces are important.

Cabling is routed through a sealed terminal box, and the leads exit upward because the connection orientation is top. This layout helps with vertical cable routing, leaves the cable bend above the motor body, and keeps fluid away from the housing joint. Winding code 047 indicates the electrical values used for this motor frame, so drive matching remains consistent with the motor's torque behavior. Mechanical power is delivered through a shaft with a keyway, and a shaft seal helps keep dust, moisture, and vapors out of the front bearing area during washdown or solvent-laden operation.

The motor is supplied with a holding brake, so the shaft can remain locked when the drive is disabled and static loads need to stay in place. The output journal uses a standardized DIN 6885 keyway, which allows installation in keyed hubs without special machining and supports direct coupling to common transmission elements. It is classified as a servo motor for potentially explosive areas, so the assembly is intended for hazardous locations where ignition control is important. This arrangement is useful on vertical axes and other applications where controlled stopping and secure standstill are required.