MKE035B-144-KP0-KN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911283901
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MKE035B-144-KP0-KN is a servo motor for potentially explosive areas and is part of the MKE Synchronous Motors series. It features a shaft with keyway according to DIN 6885, a terminal box connection on the top, and includes a shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKE035B-144-KP0-KN synchronous servo motor is produced by Bosch Rexroth Indramat within the MKE Synchronous Motors series. It is categorized as a servo motor for use in explosive atmospheres and is intended to supply precisely metered torque to motion axes in chemical processing lines, paint booths, or grain-handling equipment. Integrated feedback interfaces allow the motor to work with compatible drive amplifiers so that position, speed, and acceleration commands from the controller are converted into mechanical rotation without introducing ignition sources inside the rated zone. Its synchronous design supports stable speed response and accurate positioning during automated process steps that require repeatable motion.
Cable routing is arranged on the top, and the power and feedback conductors terminate inside a cast-aluminum terminal box, a configuration that simplifies field wiring in ceiling-mounted junction runs. This arrangement keeps cable entry away from the drive-end face, which can help in compact installations with limited side clearance. The stator uses winding code 144, giving the impedance and thermal characteristics needed for consistent torque production across the full speed range. Because the product is qualified for potentially explosive areas, external surfaces limit maximum temperature in accordance with explosion-proof standards, and the terminal enclosure includes continuous grounding paths to prevent static discharge.
Mechanical coupling is handled by a shaft with a keyway, and the corresponding DIN 6885 keyway geometry provides a standardized fit with pulleys or gear hubs without additional machining. This layout is useful where mounted components are started and stopped frequently, because the keyed connection resists slip under changing loads. The overall shaft design includes a positive-lip shaft seal, so lubricant remains inside the bearing cavity even when the output flange is oriented vertically. The sealed bearing cavity also helps keep cleaning fluids away from internal components near the shaft exit.
Frequently Asked Questions about MKE035B-144-KP0-KN:
Q: What is the connection direction for the MKE035B-144-KP0-KN motor?
A: The connection direction for the MKE035B-144-KP0-KN is at the top of the motor.
Q: What type of connection does the MKE035B-144-KP0-KN use?
A: This model utilizes a terminal box for its electrical connection.
Q: What is the shaft detail of the MKE035B-144-KP0-KN motor?
A: The MKE035B-144-KP0-KN comes with a shaft featuring a DIN 6885 keyway.
Q: Does the MKE035B-144-KP0-KN servo motor have a shaft seal?
A: A shaft seal is included on this motor to help protect internal components from contaminants.
Q: What winding type is specified for the MKE035B-144-KP0-KN motor?
A: This servo motor is designed with winding type 144, which specifies its coil configuration.
