Product Description:

The MKE035B-144-KG0-KN synchronous servo motor is manufactured by Bosch Rexroth Indramat and belongs to the MKE Synchronous Motors series. It is intended for precise closed-loop positioning and velocity control in automated assembly lines, packaging machinery, and material-handling axes. This type of motor is suited for applications where stable speed regulation and repeatable positioning must be maintained through frequent start-stop cycles. By combining a permanent-magnet rotor with integrated feedback interfaces, the motor delivers repeatable motion profiles while remaining compact enough for mounting in space-restricted machine frames. Its mechanical interface follows a modular family design that aligns with existing drive platforms.

The winding code 144 identifies the motor winding used by the matching drive for current regulation and voltage matching. Power and feedback conductors exit from the top of the stator housing, simplifying cable runs in cabinets where downward ducts are obstructed. All terminations are collected in a terminal box, providing screw-clamp connections that support armored conduit for hazardous-area routing. The motor is supplied without a holding brake, so static load retention must be provided by the application or by external clamping devices during power-off states. Torque is transferred through a plain shaft, which supports direct coupling with precision bellows or clamp hubs.

Axial alignment of mounted components is aided by a frontal centering hole in the shaft face, allowing puller tools or alignment pins to locate directly on the motor axis. A shaft seal is installed to limit the ingress of dust or fluid toward the bearing set, which is useful when the motor is exposed to process media. The output end carries a DIN 332 'DS' thread, enabling standardized accessory attachment without additional machining. As a servo motor for potentially explosive areas, the design supports installation in zones where flammable gases or vapors can be present, provided that matching drive and thermal monitoring are used.