MKD115C-024-GG0-AF Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911320563
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MKD115C-024-GG0-AF is a servo motor from the MKD Synchronous Motors series with a plain shaft and side A output connector. It features resolver feedback for position detection, insulation class F, and an IP65 protection category. The motor does not have a holding brake and allows operation in ambient temperatures from 0 to 40°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat MKD115C-024-GG0-AF is a servo motor in the MKD Synchronous Motors series. It supplies controlled rotary motion for gantries, packaging stations, and material-handling axes where precise torque and speed regulation are required. The C-length housing integrates both the power output connector and resolver plug on one end, allowing the drive controller to mount nearby and helping reduce cable runs in compact electrical cabinets. This layout also helps keep motor and feedback wiring organized when the axis is installed in tightly packed machinery.
The motor enclosure carries an IP65 rating, so dust and low-pressure water jets cannot reach the stator or bearings. Rotor position is measured with resolver feedback (RSF), which emits analog sine and cosine signals for continuous angle calculation. Closed-loop accuracy is provided with a system precision of ±8 angular minutes, which suits medium-resolution positioning tasks. Thermal endurance comes from insulation class F, supporting winding temperatures up to 155 °C during cyclic duty. Ambient operation is limited to 0 to 40 °C, and operation above this range requires derating or external cooling. Service cables exit on side A of the frame, so multiple motors can line up with uniform bend radii inside a machine base.
This model is delivered without a holding brake, so vertical loads must be secured by external clamping or maintained drive torque when power is removed. A plain shaft transmits torque through friction or shrink-fit couplings, and a front shaft seal helps prevent lubricant washout. Winding code 024 indicates the electrical values used with compatible drive settings. Position detection is relative, so a home routine is required after each power cycle. This arrangement suits systems that perform a reference move during startup before normal motion begins. The dedicated output connector keeps the connection point compact, and the C-length housing balances torque output with installation depth for compact machine layouts.
Frequently Asked Questions about MKD115C-024-GG0-AF:
Q: What type of encoder does the MKD115C-024-GG0-AF motor use?
A: This servo motor uses resolver feedback (RSF) for position detection.
Q: What is the shaft configuration on the MKD115C-024-GG0-AF motor?
A: The MKD115C-024-GG0-AF features a plain shaft and comes equipped with a shaft seal.
Q: Does the MKD115C-024-GG0-AF include a holding brake?
A: This model is built without a holding brake.
Q: What protection category does the MKD115C-024-GG0-AF provide?
A: The MKD115C-024-GG0-AF motor is rated with IP65 protection against dust and water.
Q: What is the allowable operating temperature range for the MKD115C-024-GG0-AF?
A: The permissible ambient temperature for operation is 0-40°C.
