MKD112D-027-KP3-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911286968
The Bosch Rexroth Indramat MKD112D-027-KP3-AN is a servo motor from the MKD Synchronous Motors series with a flange size of 192 mm and a centering diameter of 130 mm. It provides continuous torque at standstill of 48.0 Nm and features shaft with keyway design and resolver feedback with integrated encoder. The motor includes a holding brake delivering 70 Nm of brake torque and offers absolute position detection for more than 4096 revolutions.
Internal Product Review
The MKD112D-027-KP3-AN is a Bosch Rexroth Indramat servo motor from the MKD synchronous motor series, and the design feels well suited for precise motion applications. Resolver feedback with an integrated encoder and absolute position detection above 4096 revolutions support dependable closed-loop accuracy in demanding systems. Continuous standstill torque of 48.0 Nm and a 70 Nm holding brake make this model an excellent choice for stable positioning and controlled load holding.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD112D-027-KP3-AN servo motor is produced by Bosch Rexroth Indramat within the MKD Synchronous Motors series. It is intended for high-precision industrial automation where a drive controller requires consistent torque delivery and absolute position information to move mechanical loads accurately. By integrating electronic feedback with a keyed output shaft, the unit serves as the electromechanical interface between the control system and machinery that performs cutting, feeding, or coordinated multi-axis motion.
The motor supplies a continuous standstill torque of 48.0 Nm, giving the drive enough force to maintain load position without overheating during static holding periods. A square 192 mm mounting flange aligns the stator to adjoining frame members, while power and feedback conductors exit on Side A; this fixed orientation simplifies cable routing inside a cabinet. Termination is through a single output connector, eliminating separate screw terminals. Rotor position is provided by integrated resolver feedback, which sends analog sine-cosine signals to the controller for real-time commutation and velocity calculation.
The mechanical interface is reinforced by a holding brake rated at 70 Nm, allowing the axis to stay locked when power is removed. A centering pilot of 130 mm provides accurate concentric alignment with the driven machine element. The shaft transmits torque through a shaft with keyway and uses a shaft seal that helps limit contaminant entry. Winding code 027 identifies the electrical resistance and inductance values expected by compatible drive modules, while motor length D and size 112 set the overall package dimensions. Absolute position detection exceeding 4,096 revolutions supports extended travel tasks and allows the control system to retain position information through multi-turn motion.
