Product Description:

The MKD112D-024-KP3-AN is a servo motor manufactured by Bosch Rexroth Indramat and supplied in the MKD Synchronous Motors series. It converts electrical power into controlled rotary motion for positioning axes and feed drives used in material handling, packaging, and similar automation tasks. When paired with a compatible drive, it supports accurate torque and speed regulation during indexing, transfer, and repeat-positioning duty. This makes the motor suitable for applications that require steady motion, predictable response, and reliable closed-loop control over changing loads.

It delivers a continuous standstill torque of 48.0 Nm, allowing stable force production when the axis remains in position. An integrated holding brake produces 70 Nm, so vertical loads can remain secured during power-off conditions. The mounting flange measures 192 mm, matching the size 112 frame and supporting direct installation on common machine interfaces. The housing has an enclosure rating of IP65, and the power and feedback leads exit through a connector on Side A to keep cable routing orderly. Control resolution reaches ± 8 angular minutes, while the D length code balances rotor inertia with thermal capacity and winding code 024 sets the electrical values used by compatible drive controllers.

Mechanical alignment is aided by a 130 mm centering diameter that helps maintain concentricity between the motor flange and the mating surface. For feedback, a resolver supplies absolute position data, allowing immediate startup without a homing move. Continuous operation is permitted within an ambient range of 0–40 °C, and class F insulation allows winding temperatures up to 155 °C before derating is required. The motor uses a keyed shaft to transmit torque without slip, and the shaft seal helps protect the internal bearing area from contamination. These features support stable operation in feed axes, gantries, and other motion systems that depend on repeatable positioning.