Product Description:

The MKD112C-058-KP0-RN is a servo motor produced by Bosch Rexroth Indramat for the MKD Synchronous Motors series. It serves as an electromechanical actuator that delivers commanded torque and speed to machine axes, conveyors, and positioning tables in industrial automation cells. By converting drive current into controlled mechanical rotation, the unit supports coordinated motion between the drive controller and the connected load. This arrangement makes the motor suitable for applications that require accurate response during acceleration, steady running, and repeated positioning cycles.

A centering pilot of 130 mm aligns the motor face during installation, while the square flange measures 192 mm on each side for compatibility with common mounting surfaces and gearbox interfaces. At standstill, the motor can deliver a continuous torque of 38.0 Nm, which supports load holding without excessive thermal stress. Power leads exit through a sealed power connector, and the housing uses a right-side connection to keep cable routing clear of nearby machine components. The motor also uses a shaft seal at the output, which helps protect internal parts from contamination in typical industrial service.

A built-in resolver feedback device supplies analog sine-cosine signals for commutation and speed evaluation, while absolute position detection preserves position information across more than 4,096 revolutions after power loss. The motor uses the 058 winding for electrical matching with a compatible drive. For torque transfer, the output is supplied as a shaft with keyway, which supports secure coupling to keyed hubs under reversing loads. The motor also uses a size 112 frame with a C-length housing and does not include an internal holding brake, which keeps the package focused on servo-driven motion control.