Product Description:

The MKD112C-058-KP0-AN is a servo motor produced by Bosch Rexroth Indramat as part of the MKD Synchronous Motors series. In an automation cell, it converts the regulated output of a drive controller into rotary motion so that gantries, presses, or feed rollers follow precise velocity and torque commands. The motor is intended for permanent-magnet synchronous operation, providing fast dynamic response and steady positioning when paired with compatible digital drive systems. This operating principle also helps the axis respond smoothly to changing load conditions during repeated motion cycles.

The motor delivers a continuous standstill torque of 38.0 Nm, allowing direct coupling to medium-inertia loads without external gearing. A centering diameter of 130 mm aligns the motor accurately on the machine frame, while the square mounting flange spans 192 mm to spread clamping forces evenly across the mounting surface. Winding code 058 indicates the electrical winding arrangement used for this motor and matches the current demands of suitable drive modules. All power and feedback conductors exit on Side A, which keeps cable routing consistent and can reduce interference with nearby moving machine parts. The size code 112 and length class C correspond to the active iron volume used in this housing.

The electrical interface uses an output connector, so the motor can be connected to the system with a compact plug-in arrangement instead of fixed lead termination. Resolver feedback with an integrated encoder supports Absolute (>4096 revs) position reporting, allowing the drive to retain multi-turn position information after a power interruption. Rotary power is transmitted through a shaft with keyway, which provides positive torque transfer for repetitive reversing duty. A shaft seal helps keep coolant mist and contaminants away from the bearing chamber during operation. Because the unit is supplied without a holding brake, vertical or suspended loads require external holding force when power is removed.