MKD112C-024-KP3-RN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911288982
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MKD112C-024-KP3-RN is a servo motor from the MKD Synchronous Motors series, featuring a flange size of 192 mm and centering diameter of 130 mm. It has a continuous torque of 38.0 Nm at standstill, comes with a 70 Nm holding brake, and uses resolver feedback with integrated encoder for position detection. The motor is rated for IP65 protection, includes a shaft with keyway and seal, and has an insulation class F.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MKD112C-024-KP3-RN is a servo motor manufactured by Bosch Rexroth Indramat and supplied in the MKD Synchronous Motors series. In automated packaging lines, CNC workstations, or palletizing cells, this motor acts as a controllable rotary actuator that pairs with a drive controller to deliver repeatable motion profiles. Its built-in feedback element lets the control loop monitor rotor angle in real time, while an internal brake can secure vertical or suspended loads whenever power is removed, making the unit suitable for intermittent-duty positioning tasks.
The mechanical interface follows a centering diameter of 130 mm, allowing the stator housing to locate precisely on a matching machine recess. The rectangular flange spans 192 mm across the mounting holes for a repeatable bolt pattern. The continuous torque at standstill is 38.0 Nm, which is the load the motor can hold without exceeding its thermal limit during dwell periods. An enclosure rating of IP65 protects the windings and bearings from airborne dust and low-pressure water jets, permitting installation close to machining coolants. Position data comes from integrated resolver feedback, which supplies rotor angle signals to the drive for closed-loop control. The power connector is oriented to the right side of the housing so cable routing stays clear of adjacent assemblies.
A holding brake rated at 70 Nm counters gravitational or inertial forces during shutdown, while the motor remains thermally stable within an ambient range of 0–40 °C. Closed-loop accuracy is supported by a system precision of ±8 angular minutes, matching applications that demand tight path following without external encoders. The stator insulation conforms to class F, and the motor uses a keyed shaft with a fitted seal that helps prevent lubricant escape. The motor uses winding code 024, which corresponds to the resistance and inductance values expected by the drive for correct current regulation.
Frequently Asked Questions about MKD112C-024-KP3-RN:
Q: What type of encoder does the MKD112C-024-KP3-RN servo motor use?
A: The MKD112C-024-KP3-RN motor is equipped with a resolver feedback system with an integrated encoder for position detection.
Q: What shaft design does the MKD112C-024-KP3-RN motor offer?
A: This servo motor features a shaft with keyway and includes a shaft seal for added protection against contaminants.
Q: What is the holding brake torque for the MKD112C-024-KP3-RN motor?
A: The holding brake on this model provides a torque of 70 Nm, helping to securely hold the motor when powered off.
Q: What level of environmental protection does the MKD112C-024-KP3-RN motor provide?
A: The MKD112C-024-KP3-RN has a protection category of IP65, ensuring dust tightness and protection against water jets.
Q: What insulation class does the MKD112C-024-KP3-RN servo motor belong to?
A: This motor is classified under insulation class F, allowing operation at higher winding temperatures for enhanced durability.
